Operation; Switching On And Off; Battery Charge Level; Swivelling The Cordless Led Working Light - Parkside PLLA 12 B2 Originalbetriebsanleitung

Operation

Never use the appliance for purposes other than those for which
it was designed and only with original parts/accessories. Using
attachments or accessory tools other than those recommended in the
operating instructions can lead to a risk of injury.
Switching on and off
Switching on:
♦ Press the ON/OFF switch
The appliance lights up at maximum brightness.
♦ To reduce the brightness, hold down the ON/OFF switch
approx. 2 seconds.
To switch back to maximum brightness, press the ON/OFF
switch
Switching off:
♦ Press the ON/OFF switch

Battery charge level

■ The status will be shown on the battery display LED
RED/ORANGE/GREEN = maximum charge
RED / ORANGE = medium charge
RED = low charge – charge the battery

Swivelling the cordless LED working light

The cordless LED working light can be swivelled/adjusted into
8 positions.
♦ Swivel the cordless LED working light
of the 8 positions.
│ GB │ IE
■ 40
again for approx. 2 seconds.
.
.
by clicking it into one
for
as follows:
PLLA 12 B2