General Safety Directions For Power Tools - Parkside PWSA 12 B1 Originalbetriebsanleitung

Wear ear protection
Wear eye protection
Wear breathing protection
This device is part of the
Parkside X 12 V TEAM series
Risk of cuts!
Wear cut-resistant gloves
Direction of rotation, clamping
screw
Direction of rotation
Electrical machines do not belong
with domestic waste
Other symbols on the cutting disc:
Do not use for side grinding
Do not use for wet grinding
Do not use defective discs
Wear safety shoes
Symbols in the manual
Warning symbols with in-
formation on damage and
injury prevention.
Hazard symbol with infor-
mation on the prevention of
personal injury caused by
electric shock.
Instruction symbols with information
on preventing damage.
Help symbols with information on
improving tool handling.
General Safety Directions
for Power Tools
WARNING! READ ALL SAFETY
DIRECTIONS AND INSTRUC-
TIONS. Omissions in the compli-
ance with safety directions and
instructions can cause electrical
shock, fire and/or severe injuries.
Retain all safety directions and in-
structions for future use.
The term „power tool" in the warnings
refers to your mains-operated (corded)
power tool or battery-operated (cordless)
power tool).
1) Work area safety:
a) Keep work area clean and well
lit. Cluttered or dark areas invite ac-
cidents.
b) Do not operate power tools in
explosive atmospheres, such as
in the presence of flammable
Iiquids, gases or dust. Power tools
create sparks which may ignite the dust
or fumes.
c) Keep children and bystanders
away while operating a power
tool. Distractions can cause you to
lose control.
GB CY
7