Inhaltsverzeichnis
Werbung
CORDLESS OMNISAW
THE NUMBERS IN THE FOLLOWING TEXT
CORRESPOND WITH THE PICTURES AT PAGE 2 -
3
TECHNICAL SPECIFICATIONS
| 18 V — ---
Voltage
Charger voltage
| 230 V
Charger frequency
| 50 Hz
No load speed
| 23.000/min
Battery output
| 1.3 Ah
Charging time
| 1 hour
Weight (incl. battery)
| 1.8 kg
Lpa (sound pressure)
| 70.3 dB(A)
Lwa (sound power level)
| 81.3 dB(A)
Vibration
| 0.63 m/s
2
DESCRIPTION
Fig.A
1. Base plate and depth guide
2. Collet nut
3. Spindle lock button
4. Exhaust air vents
5. Removable auxiliary handle
6. On/off slide switch
7. Intake air vents
8. Battery
9. Depth guide bracket
10. Depth guide locking knob
11. Locking knob of depth guide bracket
12. Bit
13. Protection guide cap (not shown)
PACKAGE CONTENTS
1 Cordless Omnisaw
1 Battery 18 V
1 Battery charger
1 1/4" collet
1 1/8" collet
1 Wrench
1 Protection guide cap
1 Dust extraction adapter
1 Carrying case
1 Users manual
1 Safety instructions
1 Warranty card
Check the machine, loose parts and accessories for
transport damage.
4
SAFETY INSTRUCTIONS
The following symbols are used in these instructions for
use:
Denotes risk of personal injury, loss of life or
damage to the tool in case of non-observance of
the instructions in this manual.
Denotes risk of electric shock.
Carefully read this manual before using the machine.
Make sure that you know how the machine functions and
how to operate it. Maintain the machine in accordance
with the instructions to make sure it functions properly.
Keep this manual and the enclosed documentation with
the machine.
When using power tools, you must observe the
follwing basic safety precautions in order to ensure
protection from electric shocks, injury and fire.
Read and follow all the instructions before using this
power tool.
Look after the notes on safety.
•
Remove the battery block. When the power tool is
not being used, prior to maintenance and when
changing tools such as the clamping chuck, and drill.
•
The tool is suitable for use as a omnisaw. Any other
application is specifically excluded.
IMPORTANT SAFETY NOTES ON CHARGER
AND BATTERY BLOCK
If you come into contact with acid from the battery
block, rinse it off with water immediately. If acid gets
into your eyes, rinse out your eyes at
once with water and contact a doctor immediately!
•
Read and note the operating instructions and safety
notes for the charger and battery block before use!
•
NB! Only use the charger and battery block that
were supplied by the manufacturer - otherwise you
will risk an accident.
•
Protect the charger, battery block and power tool
from moisture, e.g. rain or snow.
•
Always check that all cables are connected correctly
before using the charger.
•
If you discover that a cable is damaged, you should
not use the charger again. Have the damaged cable
replaced immediately.
•
When the charger is not in use, the mains plug should
be removed from the power socket. Do not pull out
the plug by grasping the cable.
•
If the charger has been dropped or has otherwise
been exposed to high mechanical stresses, you
should have it checked for damage by an authorised
dealer before using it again. Damaged parts should be
repaired.
•
Exercise caution when handling the battery block
and do not drop it or expose it to impacts.
•
Never attempt to repair the charger or battery block
yourself. Repairs must always be carried out by an
authorised dealer - otherwise you risk an accident.
Ferm
Ferm
61
Werbung
Inhaltsverzeichnis
