Care; Maintenance Schedule; Dislocation / Transport; Storage / Long-Term Storage - ATIKA GHB 760 A Originalbetriebsanleitung
Benzin-gartenhäcksler
Vorschau ausblenden
Andere Handbücher für GHB 760 A:
- Originalbetriebsanleitung (8 Seiten) ,
- Montage- und bedienungsblatt (8 Seiten)
Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Care
Clean the machine thouroughly after each application so that the
faultless function is kept. To maintain their efficiency and a long life,
observe the following:
− Keep vent slits clean and free from obstructions.
− Check the locking screws (tighten where necessary).
− Clean the device after shredding.
To clean your product only use a warm moist cloth and a soft
brush.
Never use cleaning agents or solvents. Otherwise the device
may be damaged irreversibly. Plastic parts may be corroded by
chemicals.
Maintenance work
Check fuel and oil level
Oil change
Change fuel
Clean fuel filling filter
Change fuel filling filter
Cleaning the air filter
Replace air filter
Check the spark plug
and the spark plug connector
Replace the spark plug
Check the machine
Clean the machine
Check the V-belt
Check the knives
Replace the knives
D
i
s
l
o
c
a
t
i
D
i
s
l
o
c
a
t
Before each change to another work place
Stop the engine, disconnect the spark plug connector and close
the fuel valve.
Before each transport:
Stop the engine, disconnect the spark plug connector, close the
fuel valve and allow the engine to cool down.
Drain the fuel tank to prevent fuel spilling.
Secure the machine within or on the vehicle against getting out of
place.
Transport the garden shredder only upright.
S
t
o
r
a
g
e
/
L
o
S
t
o
r
a
g
e
/
L
Keep unused machines in a dry and closed area out of the reach
of children. Do not store them close to a cooker, oven or hot-
water apparatus with permanent flame or other spark-generating
devices.
Allow the engine to cool down before storing the machine.
Prior to a longer period of storage carry out the following to
extend the machine's service life and ensure an easy operating:
20
M
a
M
a
Before
After
each use
each use
o
n
/
T
r
a
n
s
p
o
r
t
i
o
n
/
T
r
a
n
s
p
o
r
t
n
g
-
t
e
r
m
s
t
o
r
a
g
e
o
n
g
-
t
e
r
m
s
t
o
r
a
g
e
− Do not clean the machine with running water or high-pressure
cleaners.
− After each operation treat bare metal parts with an environment-
compatible biodegradable spray oil to protect them against
corrosion.
i
n
t
e
n
a
n
c
e
s
c
h
e
d
u
i
n
t
e
n
a
n
c
e
s
c
h
e
d
u
After the first
Every 25
5 hours
hours
thoroughly clean the device
treat all movable parts with an environmentally friendly oil
Empty the fuel tank completely.
ventilated rooms.
compatible manner.
Operate the engine until the carburettor is empty.
Change the oil.
Remove the spark plug connector.
Remove the spark plug. Then fill a little amount of engine oil
(approx. 5-10 ml) into the cylinder. Slowly pull out the
cranking rope handle to distribute the oil. Re-mount the spark
plug.
and clean the spark plug.
for more information on storing the engine.
Check the machine for perfect condition to ensure a safe use
of it after a longer period of storage.
l
e
l
e
Every 50
Every 100
hours
hours
Never use any grease!
Always drain the tank in the open or in sufficiently
Dispose of remaining fuel in an environmentally
Before any use of the device you have to remove
Please refer to the "Engine Operating Instructions"
If
Each
required
season
Quicklinks ausblenden:
Werbung
Kapitel
Inhaltsverzeichnis
