Inhaltsverzeichnis
Werbung
hipath4000_lm.c07.fm
Amt / Networking - TDM-basiert
Networking
530
Abschnitte von BTNR 188
38. Zwangsauslösung
39. Textnachricht
40. Gebühreninformation
41. Erweiterte Netzadresse
42. Parken
43. Anrufweiterleitung
46. Anrufübernahme
7.1.9.1 Erweiterung in gemischten Netzen
Innerhalb des HiPath 4000 System werden folgende Merkmale in Zusammen-
arbeit mit CDG realisiert:
•
Konfigurierbares Routing von DX Anrufen zu ACWIN-MQ source keys
•
Automatische Anrufumleitung zur Voice Mail
•
Mehrfache Anrufumleitung
7.1.9.2 Remote registration of diversion
With the aid of this feature an authorized subscriber in a mixed HiPath 4000/iSDX
network can deactivate an immediate / variable call diversion and set a variable
call forwarding for another subscriber of the network (i.e. programme and activate
it).
Either a subscriber in the system generally has the feature authorization, e.g. the
attendant (= one of the privileged subscribers), or he is issued a PIN for the
feature, which he has to use together with the feature code and the number of the
remote subscriber.
7.1.9.3 Rerouting
As part of this feature, two control mechanisms are implemented in HiPath 4000
(existent in iSDX) that are to become effective in the event of overload (traffic jam)
that cannot be bypassed in a transit network node:
•
Prevention of internal rerouting: this is to prevent repeated attempts at
rerouting in an iSDX/HiPath 4000 network (= internal), since the route,
because of the network topology, must keep coming back to the overloaded
transit node.
HiPath 4000-
Unterstützung
nur Transitknoten
nur Transitknoten
nur Transitknoten
nur Transitknoten
teilweise
nur Transitknoten
ja
A31003-H3150-F100-3-18, 01/2011
HiPath 4000 V5, Leistungsmerkmalbeschreibung
Bemerkung
Annahme von Direktrufen -
HiPath 4000 CorNet NQ-
LM
Werbung
Inhaltsverzeichnis
