Application Bis C-6_0 Processor - Balluff BIS C-6 0 RS 232 Serie Handbuch

C-6_0-007-00_836905_E_0704.p65
7
System components
Schematic
representation of an
identification system
(example)
8
Selecting system
components
8 english
Introduction
BIS C-620 Identification System
The main components of the BIS C-620 Identification System are
– Processor,
– Read/write heads, and
– Data carriers.
Connections to host system
Processor BIS C-620
Data carrier BIS C-1_ _-...
1 ) except BIS C-350 and -352
Application
BIS C-6_0 Processor
The BIS C-600 processor has a plastic housing. Connections are made through a terminal
strip, with the cable secured by a PG fitting. A single read/write head from series BIS C-65_
can be directly connected to the processor, which creates a compact unit. If the BIS C-650
adapter is attached instead of the BIS C-65_ read/write head, two read/write heads may be
cable connected. If the BIS C-670 adapter is attached, one read/write head may be cable
connected.
The BIS C-620 processor has a metal housing. Connection is made through round connec-
tors. Two read/write heads can be cable connected to the BIS C-620 processor.
Additional information on the read/write heads in series BIS C-65_ including all the possible
data carrier combinations can be found in the manuals for the respective read/write heads.
Whether the compact version of the processor with integrated read/write head makes sense
or whether the external solution is preferred depends primarily on the spatial arrangement of
the components. There are no functional limitations. All read/write heads are suitable for both
static and dynamic reading. Distance and relative velocity are based on which data carrier is
selected. Additional information on the read/write heads in series BIS C-65_ and series
BIS C-3_ _ including all the possible data carrier/read-write head combinations can be found
in the manuals for the respective read/write heads.
The system components are electrically supplied by the processor. The data carrier represents
an free-standing unit and needs no line-carried power. It receives its energy from the read/
write head. The latter constantly sends out a carrier signal which supplies the code head as
soon as the required distance between the two is reached. The read/write operation takes
place during this phase. Reading and writing may be dynamic or static.
via RS 232 (V.24)
Processor BIS C-620
1)
Read/write head
7
english