Balluff BIS C-6 0 RS 232 Serie Handbuch Seite 69

C-6_0-007-00_836905_E_0704.p65
59
Opening the
processor
BIS C-600
Opening the processor
60
Attaching a read/
write head or
BIS C-650/-670
adapter
60 english
BIS C-600
Processor / Head Assembly
The BIS C-600 processor must be opened in order to make the connections.
Ensure that the device is turned off. Remove the 4 screws on the BIS C-600 and lift off the
cover. Guide the connection cable through the cable fittings. See following pages for additio-
nal details.
BIS C-600
Processor / Head Assembly
To change out a read/write head: Turn processor off and open. Remove mounting screws on
the read/write head (see page 58) and remove processor cover (see page 59). Unplug the
read/write head from the circuit board and draw the connection cable out through the cable
opening. To attach the new head, proceed in reverse.
Attaching the cover (4 screws),
max. permissible torque 0.15 Nm
Write your configuration data on the sticker supplied
and apply it to the interior of the housing cover.
To attach the adapter, proceed as described above. For
the BIS C-650 both connection cables must be
plugged into the circuit board.
Connecting the integrated read/write head or
BIS C-670 adapter
Connections for the BIS C-650 adapter
1 = Head 1
2 = Head 2
Attaching the cover (4 screws),
max. permissible torque 0.15 Nm
59
english