Assembly; Operation; Switching On/Off - Parkside PNTS 1500 B3 Originalbetriebsanleitung

• The device must only be connected to
a mains socket via a residual-current
circuit breaker (RCD) with a rated leak-
age current of not more than 30 mA.
CAUTION! The following states
how damage to the appliance and
possible injury to people can be
avoided:
• Ensure that the machine is correctly
assembled and the filters are in the cor-
rect position.
• Do not use without the filter. This could
damage the machine.
• Only use replacement parts and acces-
sories delivered and recommended by
our Service Centre (see page 42). The
use of parts by other manufacturers im-
mediately renders the guarantee void.
• Only have repairs carried out at our
authorised customer service points.
• Observe the instructions for cleaning
and maintenance of the machine.
• Store the appliance in a dry place and
out of reach of children.

Assembly

Pull out the mains plug.
Danger of electric shock.
1. Attach the feet (6) to the hous-
ing:
- The feet with wheels (6a)
numbered
appropriate adaptors on the
rear side of the waste collec-
tor (see
- The feet with guide rollers
(6b) to the holders on the
front side of the container (5).
2. Secure the feet with the Philips
 + ‚ into the
small picture).
head screws supplied.
3. Place the motor housing (3) on
top of the collector (5) and close
it with the clip.
4. Lightly squeeze together the
ends of the retaining bracket
(25) and click it into the motor
housing (3).
5. Installing the accessories:
- Attach the vacuum hose (18).
- Fit the handle with air control
(15).
- Install the telescopic suction
tube (16). (Press the button on
the telescopic suction pipe to-
wards
desired length).
- Install the nozzle desired (
21/22/23/24).
Never vacuum without a
filter!

Operation

Fully unwind the suction hose (
18) before commencing work.

Switching on/off

Connect the mains plug.
To vacuum dust, plug the electrical
tool onto the mains socket on the
vacuum (
Only connect electrical appliances
with a maximum power rating of
2200 W.
Switching on the vacuum cleaner
(Permanent operation):
Move the On/Off switch (
position.
GB
and pull out to the
9).
10) to the "I"
35