Inhaltsverzeichnis
Werbung
Task
Select a channel, math,
reference, or bus waveform to
make it active
Display scale or navigation
buttons on a badge
2
(waveform, measurement
,
search, horizontal).
Open a configuration menu on
any item (all badges, views,
cursor readouts, labels, and so
on).
Open a right-click menu
(badges, views).
3
Close a configuration menu.
Move a menu.
4
Move a callout.
Change horizontal or vertical
settings directly on a waveform.
Vertical changes only apply
to the selected channel or
waveform; horizontal changes
apply to all channels and
waveforms.
Increase or decrease the zoom
area (while in Zoom mode)
Quickly scroll or pan a waveform
or list.
Close or open the Results Bar
to increase the Waveform View
area.
Table continued...
2
Not all measurement or search badges display navigation buttons.
3
Some dialog boxes will not close until you click an OK, Close, or other button in the dialog.
4
Callouts are screen objects and are not associated with any particular waveform channel or slice.
5
Start to move the callout as soon as selected (highlighted), otherwise the UI opens the right-click menu.
MSO24, MSO22 2 Series Mixed Signal Oscilloscopes Quick Start Manual
Touchscreen UI action
Stacked or Overlay mode: Tap the Channel or
Waveform badge.
Stacked mode: Tap the channel, math, reference,
or bus waveform slice or handle.
Overlay mode: Tap the channel or waveform
handle.
Tap the badge.
Double-tap the badge, view, or other object.
Touch and hold on the badge, Waveform View, Plot
view, or other screen item until a menu opens.
Tap anywhere outside the menu or dialog.
Touch and hold the menu title bar or a blank area
in the menu, then drag the menu to new position.
Touch and hold on a callout and quickly
drag, then move to new position.
Tap a badge and use the Scale buttons.
Touch and hold two fingertips on the waveform
view, move them together or apart vertically or
horizontally, lift from screen; repeat.
Touch and hold two fingertips on the waveform
view, move them together or apart vertically or
horizontally, lift from screen; repeat.
Touch and drag in the waveform or list.
Tap on the Results Bar Handle (three vertical dots
in border) or anywhere in the border between the
Waveform View and the Results Bar.
Getting acquainted with your instrument
Mouse action
Stacked or Overlay mode: Left-click the Channel or
Waveform badge.
Stacked mode: Left-click the channel, math,
reference, or bus waveform slice or handle.
Overlay mode: Left-click the channel or waveform
handle.
Click the badge.
Double-click the badge, view, or other object.
Right-click the object.
Click anywhere outside the menu or dialog.
Click and hold the right mouse button on title or
blank area, drag to new position.
5
Click and hold the right mouse button on the
start to
callout and quickly start to drag, then move to the
new position.
Left-click a channel, waveform, or Horizontal
badge and click on the Scale buttons.
Click the + or - buttons on the Zoom Title bar.
Click the Draw-a-Box button, draw a box around
the waveform area of interest.
Click and drag in the waveform or list.
Click the Results Bar Handle (three vertical dots
in border) or anywhere in the border between the
Waveform View and the Results Bar.
Click and drag the Results Bar divider.
36
Werbung
Inhaltsverzeichnis
