Inhaltsverzeichnis
Werbung
Button
Save
Rear and side panel connections
The rear and side panel connections supply power to the instrument and provide connectors for network, USB devices, digital probes,
battery pack, and instrument stand.
Description
1 Use the digital probe connector to connect the P6316 Logic Probe.
2 Use the USB Device port to connect to a PC to remotely control the oscilloscope using the USBTMC protocol.
3 Use the LAN connector (RJ-45) to connect the oscilloscope to a 10/100 Base-T local area network.
4 Use the two USB Host ports to connect a USB memory device, keyboard, or mouse
5 The ground lug external chassis ground point allows you to connect your instrument chassis to a ground reference. Use the ground
lug when the instrument is operating on power from the optional battery pack accessory. Attach an anti-static wrist strap to the
ground lug to reduce electrostatic damage (ESD) while you handle or probe the DUT.
Table continued...
MSO24, MSO22 2 Series Mixed Signal Oscilloscopes Quick Start Manual
Description
Save is a one-push save operation that uses the current File > Save As settings to save screen-shots
(including open menus and dialog boxes), waveform files, instrument settings. If a File > Save or File
> Save As operation has occurred since the last instrument start-up, pushing the button saves the file
types to the location last set in the Save As configuration menu. If no file save operation has occurred
since the last instrument start-up, pushing the button opens the Save As configuration menu. Select
a tab to choose the type of file to save (such as; Screen Capture and Waveform), set any associated
parameters, and where to save it, and select OK. The specified file or files are saved. The next time
you push the button, the same type files are saved. Screen Captures save the entire screen, including
most displayed configuration menus and dialog boxes.
Getting acquainted with your instrument
21
Werbung
Inhaltsverzeichnis
