Connecting Probes To The Instrument; Rackmount Option Information - Tektronix 2 Serie Schnellstartanleitung

Installing your instrument
3. Check that the status of all power-on self tests are Passed.
If one or more power-on self tests shows Failed:
1. Power cycle the instrument.
2. Select Utility > Self Test. If one or more power-on self tests still shows Failed, contact Tektronix Customer Support.

Connecting probes to the instrument

Probes connect the instrument to your device under test (DUT). Use a probe that best matches your signal measurement needs.
Connect a BNC passive probe or cable by pushing it onto a channel BNC bayonet connector and turn the lock mechanism clockwise until it
locks.

Rackmount option information

An optional rackmount kit lets you install the oscilloscope in standard equipment racks.
Please refer to your product's datasheet at www.tek.com for more information on rackmount options.
MSO24, MSO22 2 Series Mixed Signal Oscilloscopes Quick Start Manual 17