Herunterladen Inhalt Inhalt Diese Seite drucken

Tektronix 2 Serie Schnellstartanleitung Seite 20

Vorschau ausblenden Andere Handbücher für 2 Serie:
Inhaltsverzeichnis

Werbung

Button
Horizontal Position
Horizontal Scale
Vertical Position
Vertical Scale
Channel buttons
Math
Ref
Bus
Digital
Autoset
Default Setup
Touch Off
Table continued...
MSO24, MSO22 2 Series Mixed Signal Oscilloscopes Quick Start Manual
Description
Moves the waveform and graticule side to side on the screen (changing the trigger point position in the
waveform record). Push the knob to center the trigger event to the center graticule on the Waveform
view.
Sets the time per major horizontal graticule division and samples/second parameters for the
oscilloscope. Scale applies to all waveforms. Push the knob to enable the Fine mode for making
smaller increment changes. Push the knob again to close Fine mode.
Moves the selected waveform (Channel, Math, Reference, Bus) and its graticule up or down on the
screen. The color of the knob indicates which waveform the knob is controlling. Push the knob to set
the threshold level to 50% of the peak-to-peak amplitude range of the signal.
Sets the amplitude units per vertical graticule division of the selected waveform. The scale values are
shown on the right edge of the horizontal graticule lines, and are specific to the selected waveform in
both Stacked or Overlay modes (in other words, each waveform has its own unique vertical graticule
settings regardless of display mode). The color of the knob indicates which waveform the knob is
controlling.
Turn on (display), select, or turn off Channel, Math, Reference, or Bus waveforms. The number of
channel buttons depends on the instrument model. If the channel is not displayed, pushing a Channel
button turns on that channel to the Waveform view. If the channel is on the screen and is not selected,
pushing that channel's button selects that channel. If the channel is on the screen and is also selected,
pushing that channel's button turns that channel off (removes it from Waveform view).
Adds or selects a Math waveform on the Waveform view. If no Math waveform exists, pushing the
Math button adds a Math waveform to the Waveform view and opens the Math configuration menu. If
only one Math waveform is displayed, pushing the button turns off the Math waveform (removes it from
Waveform view). Push the button again to display the waveform. If two or more Math waveforms are
displayed, pushing the button cycles through selecting each math waveform.
Adds or selects a Reference (saved) waveform on the Waveform view. If no Reference waveform
exists, pushing the button opens the Browse Waveform Files configuration menu. Navigate to and
select a waveform file (*.wfm) and tap Recall to load and display the reference waveform. If only one
Reference waveform is displayed, pushing the button turns off the Reference waveform (removes it
from the Waveform View). Push the button again to display the waveform. If two or more Reference
waveforms are displayed, pushing the button cycles through selecting each Reference waveform.
Adds or selects a bus waveform on the Waveform view. If no Bus waveform exists, pushing the button
adds a Bus waveform to the Waveform view and opens the Bus configuration menu. If only one Bus
waveform is displayed, pushing the button turns off the Bus waveform (removes it from Waveform
view). If two or more Bus waveforms are displayed, pushing the button cycles through selecting each
Bus waveform.
Adds or selects a digital waveform on the Waveform view. If no digital waveform exists, pushing the
button adds a digital waveform to the Waveform view and opens the digital configuration menu. If only
one digital waveform is displayed, pushing the button turns off the digital waveform (removes it from
Waveform view). If two or more digital waveforms are displayed, pushing the button cycles through
selecting each digital waveform.
Automatically displays a stable waveform.
Restores the oscilloscope settings (such as; horizontal, vertical, scale, position) to the factory default
settings.
Turns touch screen capability off. The button is lighted when the touch screen is turned off.
Getting acquainted with your instrument
20

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Mso24Mso22

Inhaltsverzeichnis