Herunterladen Inhalt Inhalt Diese Seite drucken

JUNO JB126S2 Benutzerinformation Seite 14

Vorschau ausblenden Andere Handbücher für JB126S2:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Clock function
End Time
Time Delay
Set + Go
Minute Minder
00:00
Count Up Timer
8.2 How to set: Time of Day
After the first connection to the mains, wait
until the display shows
flashes.
1. Press
or
2. Press
.
3. Press
or
4. Press
.
The display shows the new time.
To change the time of day press
and again until
starts to flash.
8.3 How to set: Duration
1. Set a heating function and temperature.
2. Press
again and again until
to flash.
3. Press
or
Duration.
4. Press
or the Duration starts
automatically after 5 seconds.
5. Press
or
Duration.
6. Press
or the Duration starts
automatically after 5 seconds.
When the set time ends, the signal sounds for
2 minutes. The display shows flashing
time setting. The oven turns off.
7. Press a sensor field to stop the signal.
14
ENGLISH
Application
To set when the oven turns off.
To combine Duration and End Time function.
To turn on the oven with necessary settings with only one press of
the sensor field any time later.
To set a countdown time. This function has no effect on the opera‐
tion of the oven. You can set the Minute Minder at any time and also
when the oven is off.
To set the count up, which shows how long the oven works. It is on
immediately when the oven starts to heat. The Count Up Timer is
not turned on if Duration and End Time are set. This function has no
effect on the operation of the oven.
and 12:00. "12"
to set the hours.
to set the minutes.
again
starts
to set the minutes for
to set the hours for
8. Turn off the oven.
8.4 How to set: End Time
1. Set a heating function and temperature.
2. Press
to flash.
3. Press
press
then the hours.
When the set time ends, the signal sounds for
2 minutes. The display shows flashing
the time setting . The oven turns off
automatically.
4. Press a sensor field to stop the signal.
5. Turn off the oven.
8.5 How to set: Time Delay
1. Set a heating function and temperature.
2. Press
to flash.
3. Press
Duration.
4. Press
5. Press
Duration.
6. Press
The display shows flashing
and
again and again until
or
to set the End Time and
. First you set the minutes and
again and again until
or
to setthe minutes for
.
or
to set the hours for
.
.
starts
and
starts

Werbung

Inhaltsverzeichnis

Fehlerbehebung

loading

Diese Anleitung auch für:

Jb126d2

Inhaltsverzeichnis