Troubleshooting - JUNO JB126S2 Benutzerinformation

Back lamp
Step 1
Turn the glass cover to remove it.
Step 2
Clean the glass cover.
Step 3
Replace the lamp with a suitable 300 °C heat-resistant lamp.
Step 4
Install the glass cover.

14. TROUBLESHOOTING

WARNING!
Refer to Safety chapters.
14.1 What to do if...
Problem
You cannot activate or operate
the oven.
The oven does not heat up.
The oven does not heat up.
The oven does not heat up.
The oven does not heat up.
The oven does not heat up.
The oven does not heat up.
The oven does not heat up.
The lamp does not operate.
The display does not show the
time during the off status.
It takes too long to cook the
dishes or they cook too quickly.
Possible cause
The oven is not connected to an
electrical supply or it is connected
incorrectly.
The oven is deactivated.
The door is not closed correctly.
The clock is not set.
The necessary settings are not
set.
The automatic switch-off is acti‐
vated.
The Child Lock is on.
The fuse is blown.
The lamp is defective.
The display is deactivated.
The temperature is too low or too
high.
Remedy
Check if the oven is correctly
connected to the electrical supply
(refer to the connection diagram if
available).
Activate the oven.
Fully close the door.
Set the clock.
Make sure that the settings are
correct.
Refer to "Automatic switch-off".
Refer to "Using the Child Lock".
Make sure that the fuse is the
cause of the malfunction. If the
fuse is blown again and again,
contact a qualified electrician.
Replace the lamp.
Touch and at the same
time to activate the display again.
Adjust the temperature if neces‐
sary. Follow the advice in the
user manual.
ENGLISH 27