Herunterladen Inhalt Inhalt Diese Seite drucken

Operation Buttons; Mode Button; Power Button - CLIVET STANDING 2 IS3-XY 140M Serie Handbuch

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Use
3.5

Operation buttons

3.5.1

Mode button

Press this button to select the appropriate operation
mode. Each time the button is pressed, the operating
mode changes and follows the sequence indicated by
the arrows:
AUTO
FAN ONLY
The mode indicators turn on according to the option
selected.
AUTO (Automatic): Automatically chooses the operation
mode by detecting the difference between the actual
room temperature and the temperature set on the remote
control. The fan speed is automatically controlled.
COOL (Cooling): the air is cooled to the set temperature
(control range: 17°C~30°C).
DRY (Dehumidification): the air is cooled to the desired
temperature with low fan speed so as to dehumidify the
room (control range: 17°C~30°C). In Dehumidification
mode neither the fan speed nor Sleep mode can be
selected.
HEAT (Heating): the air is heated to the set temperature
(control range: 17°C~30°C).
FAN ONLY (Ventilation): only the fan is activated, without
any air cooling or heating action. However, in this case
the temperature is not displayed and its value cannot be
controlled.
COOL
DRY
HEAT
3.5.2 Avoid button
Press this button to activate the function that prevents the
airflow from blowing directly at people: when this function
is activated, the flaps move horizontally at an angle of 115°
in Cooling or 60° in Heating.
Press either the
,
function.
3.5.3

Power button

Power button: operation starts when the
pressed and stops when it is pressed again.
3.5.4 Fan button
Ventilation button: this button is used to select the
desired fan speed. Each time the button is pressed, the
fan speed changes and follows the sequence indicated
by the arrows:
LOW
MED
Fan speed display:
1
2
LOW speed: zones 1~2 light up.
MED speed: zones 1~4 light up.
HIGH speed: zones 1~6 light up.
AUTO speed: zones 1~7 and "AU" light up.
Note: When the remote control is used to select HIGH fan
speed, zones 1~7 light up.
or
button to stop the
button is
HIGH
AUTO
4
6
7
19

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis