Inhaltsverzeichnis
Werbung
4) Exchange the front wheels
You can exchange the wheels from the small
KITE 150 to the bigger KITE 250 wheels and
vice versa. Wheels can be bought separately
as an accessory.
1. Unscrew and remove the wheel lock.
2. Remove the wheel.
3. Place the wheel.
4. Screw the wheel lock back in position
5. Never combine KITE 150 with KITE 250 wheels.
5) Exchange the rear wheels
You can exchange the wheels from the small
KITE 150 to the bigger KITE 250 wheels and
vice versa. Wheels can be bought separately
as an accessory.
1. Remove the Cap gentle with a flat head
screwdriver. (KITE 250 - in the small cutout
in the wheel.)
2. Use a allen key to remove the wheel
3. Place the wheel and make sure the ball
bearings are in position before you screw
the wheel in position.
4. Push the wheel cap back in position.
5. Never combine KITE 150 with KITE 250 wheels.
6) Rope adjustment
During use of the stroller the tension in the
high quality ropes may decrease a bit over
time due to normal wear. It is possible to
tension the ropes if needed. Please contact
your retailer if rope adjustment should be
necessary.
Rope adjustment:
1. Fold the stroller and unscrew the two rope connection parts on the handle.
2. The rope connection parts are placed in the lower hole. Move the rope connection
parts to one of the higher holes to tension the rope.
NOTE The rope connection parts must be placed in the same height.
3. Screw the rope connection parts back in position.
NOTE Make sure the nuts are in place before you screw it together.
34
WARNING
-
Make sure the screws are in place
before use.
-
Check that the wheel is firmly fixed
and can not be pulled from the
chassis.
-
Avoid driving over sharp objects or
sufaces eg. glass or the tyre can be
punctured
WARNING
-
Make sure the screws are in place
before use.
-
Check that the wheel is firmly fixed
and can not be pulled from the
chassis.
-
Avoid driving over sharp objects or
sufaces eg. glass or the tyre can be
punctured
WARNING
-
Make sure the rope connection parts
are placed in the same hight before
use.
-
Make sure the screws and nuts are in
place before use.
V.1.1
SERVICE
1) Service Documentation
Your stroller requires regular care and
maintenance. We recommend that you
have your product serviced regularly,
following the suggested service intervals in
order for you to take full advantage of and
maintain the quality of the product and
to minimize the effects of wear and tear.
Always take your product to an authorised
Emmaljunga retailer to carry out the
service. After every service you will receive
a report covering what has been inspected
and checked together with a note stating
Chassis number
0
Delivery control
Customer name, signature
6
month control
Date, stamp
Customer name, signature
24
month control
Date, stamp
Customer name, signature
V.1.1
the date on which the service has been
carried out. Before the pram is sent from
the factory it has undergone regular checks
and testing. Another check is completed
before the product is given to you to
ensure that it fulfills all safety and quality
requirements. In addition to the regular
service by your authorised retailer it is very
important that you also check and maintain
the product. You can find out more about
this under the care and maintenance
section in the product manual.
12
month control
Date, stamp
Customer name, signature
36
month control
Date, stamp
Customer name, signature
SE
EN
CZ
DE
DK
EE
ES
FI
NO
SVK
BG
FR
GR
HR
HU
IS
IT
LV
LT
ML
NL
PL
RO
PT
RS
RU
SL
TR
35
Werbung
Inhaltsverzeichnis
