Inhaltsverzeichnis
Werbung
Attach/Remove the adapter
3. Remove the fabric form the seat plate by opening the velcro strip and press buttons
holding the seat fabric in place. It is not necessary to remove the complete seat
fabric. Pull the Crotch strap thru the fabric.
4. Pass the crotch strap down through the seat fabric.
5. Insert the adapter by inserting the adapter hooks into the holes at the back of the
seat and clicking into the adapter in the seat. Fold thereafter back the seat fabric.
Attach / remove the car seat from the adapter
Follow the car seat manufacturer's manual on how to attach and detach the car seat
from the adapter. NOTE! Always use the car seat in an upright position if the carseat
offers different seating positions.
6. To remove the adapter set from the seat unit, pull the button located underneath
the seat plate. Then replace the seat fabric and pull through the crotch strap of the
5-point harness.
7. In order for the seat cover to be correctly fitted, make sure that:
7.1 The pushbuttons next to the Velcro strap must be pulled between the seat plate
and the tube under the seat (tight) and always be closed. This step is very important!
7.2. The seat fabric is attached with the Velcro strap
7.3. The outer pushbuttons on the side must be fastened around the chassis tube.
CARE & MAINTENANCE
1) General Care and Maintenance Instructions
•
Never expose your stroller to excessive sunlight for long periods of time.
•
Always use a raincover when it is snowing or raining.
•
Never store your stroller in cold and/or damp places.
•
Should the chassis become wet, dry it off promptly. Make sure vehicle is completely
dry before storing.
•
If the stroller is used near the ocean or salted roads, spray the chassis with a hose,
and dry.
•
Be careful during transportation and storage as the surface of the chassis is fragile.
Scratches that arise after the sale are not a justifiable complaint.
2) Routine Inspection
Regularly clean the chassis and metal parts of the vehicle, dry off and lubricate
thereafter all joints. Spokes and rims on all wheels should frequently be washed in hot
water and wiped off with a dry cloth. When the stroller is used during the winter time,
cleaning of the stroller should be done at least once a week. Lack of maintenance
could cause rust.
WARNING
Tyres can when in contact with PVC-flooring or other plastic materials cause
discoloration. Always use wheel protection if the stroller is stored on delicate surfaces.
32
Check that:
•
all chassis locking devices are functioning properly.
•
all rivets, nuts and bolts are firmly tightened and not broken.
•
all plastic parts are not cracked or broken.
•
the wheel bearings are in a good condition.
•
all zips and velcro straps are securely fastened.
•
all elastic straps are in a good condition.
•
the brake works.
•
all ropes and rope stitches are in proper condition and not damaged
•
check regularly for damage to the chassis
PLEASE NOTE
•
When in need of servicing with original parts and other technical issues that
require a professional evaluation, Always get in touch with the store where you
purchased your product.
•
The product you have chosen follows the guarantee regulations.
•
The parking brake consists of moving parts and requires regular maintenance to
function correctly.
•
To ensure effective functioning always make sure that the parking brake is well
lubricated.
3) Washing Instructions
Hood: Shower the hood from the inside (interior fabric) with lukewarm water. Use
mild liquid soap as detergent. Cleanse it thoroughly. Drip dry the fully extended
hood.
Seat fabric and 5-point harness: Remove the seat fabric from the chassis and
remove the back seat board from the seat fabrics. Hand wash seat fabrics in
lukewarm water. Use mild liquid soap as detergent. Cleanse thoroughly. Drip dry the
seat fabric. Only wipe the nylon straps and plastic parts clean with a damp cloth. Do
not hand wash. Make sure the harness is dry before reassembly.
Ironing: If any fabric part needs to be ironed, always use a 100 % cotton cloth
in-between the iron and the fabric to protect the fabric surface. Iron the exterior
fabrics (100 %) polyester and the interior fabrics on gentle heat (110°C on the iron).
Make sure all parts are completely dry before reassembly. Check all seams, edges
and zips.
General Information: You may apply a material protector on the exterior fabric
after washing. Always apply before reassembly.
WARNING
•
Do not place your child/children in the stroller for at least 24 hours after
applying a material protector. Reassemble after washing
•
Make sure all parts are assembled correctly according to the instructions in this
manual.
V.1.1
V.1.1
SE
EN
CZ
DE
DK
EE
ES
FI
NO
SVK
BG
FR
GR
HR
HU
IS
IT
LV
LT
ML
NL
PL
RO
PT
RS
RU
SL
TR
33
Werbung
Inhaltsverzeichnis
