Symbols And Icons; General Safety Instructions; Safe Operation - Parkside PSBS 240 B2 Originalbetriebsanleitung

Symbols and icons

Symbols on the device:
Warning!
Risk of injury from the rotating tool!
Keep hands away.
Risk of electric shock! Disconnect
from the mains before carrying out
maintenance and repair work.
Read the instruction manual.
Wear ear protection.
Wear eye protection.
Wear breathing protection.
Risk of cuts.
Wear cut-resistant gloves.
Never use faulty grinding disks.
Do not dispose of electrical equip-
ment in household waste.
Dimensions grinding disk
Dimensions grinding belt
Symbols in the manual:
Warning symbols with in-
formation on damage and
injury prevention.
Instruction symbols (the instruction is
explained at the place of the excla-
mation mark) with information on
preventing damage.
Help symbols with information on
improving tool handling.

General safety instructions

Safe operation:

Keep work area clear. Cluttered
•
areas and benches invite injuries.
Consider work area environ-
•
ment.
- Do not expose tools to rain. Do not
use tools in damp or wet locations.
Water entering a power tool will in-
crease the risk of electric shock.
- Keep work area well lit.
- Do not use tools in the presence of
flammable liquids or gases.
Power tools create sparks which may
ignite the dust or fumes.
Guard against electric shock.
•
Avoid body contact with earthed or
grounded surfaces (e.g. pipes, radia-
tors, ranges, refrigerators).
Keep other persons away.
•
Do not let persons, especially children,
not involved in the work touch the tool
or the extension cord and keep them
away from the work area.
Store idle tools. When not in use,
•
tools should be stored in a dry locked-
up place, out of reach of children.
Do not force the tool. It will do
•
the job better and safer at the rate for
which it was intended.
Use the right tool.
•
- Do not force small tools to do the job
of a heavy duty tool.
- Do not use tools for purposes not
intended; for example do not use cir-
cular saws to cut tree limbs or logs.
Use of the power tool for operations dif-
ferent from those intended could result in
a hazardous situation.
GB
7