9.7
Seals and tubes
To insure proper function of the Suction Pump, all tubes and seals must be periodically checked, and replaced after
at most 250 sterilization cycles or five years of operation. Only when in perfect order can sufficient vacuum be built
up.
Defective seals and tubes must be replaced.
1
1.
Seal (O-Ring) at intake nozzle of control unit for connection with bacteria filter----------- 2 units ------ Art. No. 4063
2.
Connecting tube between bacteria filter and secretion jar lid (VACUUM) ------------------- 1 unit -------- Art. No. 4075
3.
Seal (O-Ring) at connection nozzle (unscrewable, VACUUM) at secretion jar lid----------- 4 units ------Art. No. 4064
4. Seal (O-Ring) at overflow protection system at jar lid---------------------------------------------- 1 unit ------- Art. No. 28958
5.
Main seal between jar lid and jar------------------------------------------------------------------------- 1 unit ------- Art. No. 28957
6.
Seal (O-Ring) at connection nozzle (unscrewable, PATIENT) of secretion jar lid ------------ 4 units ------ Art. No. 4063
7.
Suction tube between connection nozzle (PATIENT) and cannula ------------------------------ 1 unit -------- Art. No. 6026
18
2
3
4
5
Operating instructions Vacuson 60 LP, Art. No. 31793, V46/13
7
6
Vacuson 60 LP