CMi C-B-RM-51HMA Originalbetriebsanleitung Seite 44

GB
Maintenance
• Before conducting any maintenance on
the device, always turn off the motor and
pull the ignition cable plug.
• Check the fuel system regularly for leaks
or defective parts.
• Only those maintenance and fault elimi-
nation tasks described here may be car-
ried out. Any other tasks must be com-
pleted by a specialist.
• Only use original replacement parts. Only
these replacement parts are designed
and suitable for the device. Other replace-
ment parts will not only lead to an invalida-
tion of the warranty, they may also endan-
ger you and your environment.
Device-specific safety instructions
• Before starting work check the area and
remove all objects which may damage the
cutting mechanism.
• Always ensure sufficient distance to the
cutting mechanism.
• Only use unit at walking speed.
• Only work with good light and visibility.
• The clothing of the operator should be
close-fitting. Avoid wearing loosely fitting
clothing. Wear sturdy footwear and long
work trousers.
• Ensure that no other people or animals
are located in the area you are working in.
• When changing direction on a slope, be
particularly careful.
• Pay attention when walking backwards.
Danger of stumbling!
• Never place your hands or feet on or
under rotating parts.
• Exercise caution with tools that run-on.
Before commencing work on these tools,
wait until they have come to a complete
standstill!
• Pay attention to local regulations for rest
periods.
• Symbols affixed to your tools may not be
removed or covered. Information on the
device that is no longer legible must be
replaced immediately.
Observe the safety instructions be-
fore using the product for the first
time.
Read and observe the operating in-
structions before commissioning.
Highly flammable fuel! Danger of
fire!
44
Risk of injury due to flying objects!
Always ensure sufficient safety dis-
tance is held.
Touch parts only then when they are
completely stopped.
STOP
Never reach into the cutting mecha-
nism.
Before any maintenance work, pull
out the ignition cable and read the
usage instructions.
Caution, hot surface! Danger of be-
ing burnt!
Petrol motors produce carbon mon-
oxide. Do not use indoors.
Personal protective clothing
Wear ear defenders when working
with the device.
When working with the tool wear
sturdy footwear.
Wear goggles when working with
the device.
Wear safety gloves when working
with the device.
Training
• Carefully read the instructions for use.
Familiarise yourself with the operating
elements and the correct use of the
machine.
• Never allow children or other persons not
acquainted with the instructions for use to
use the lawnmower. Local regulations
may specify the minimum age of the user.
• Never work when persons, especially chil-
dren and animals, are close by.
• Remember that the operator or the user is
responsible for accidents involving other
persons or damage to their property.
Preparatory actions
• Always operate the machine wearing
sturdy shoes and long trousers. Do not
operate the product in your bare feet or
while wearing sandals. Avoid wearing
loose clothing or clothing with hanging
ties or belts.
• Check the terrain on which the machine is
to be used and remove any objects that
could be taken up flung away by the
machine.