Herunterladen Inhalt Inhalt Diese Seite drucken

Transporting The Battery; Storing; Storing The Battery; Cleaning - Stihl FSA 90 Gebrauchsanleitung

Vorschau ausblenden Andere Handbücher für FSA 90:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1

16 Storing

► If a metal cutting attachment is mounted: Fit
the matching transport guard.
Carrying the brushcutter
► Carry the brushcutter in one hand properly
balanced by the shaft, with the cutting attach‐
ment behind you.
Transporting the brushcutter in the car
► Secure the brushcutter to prevent turnover
and movement.
15.2

Transporting the Battery

► Switch off the brushcutter and remove the bat‐
tery.
► Check that the battery is in a safe condition.
► Pack the battery in packaging in such a way
that it cannot move inside the packaging.
► Secure the packaging so that it cannot move.
The battery is subject to the Carriage of Danger‐
ous Goods regulations. The battery is classified
as UN 3480 (lithium ion batteries) and has been
tested pursuant to UN Manual Tests and Criteria
Part III, Subsection 38.3.
The transport regulations can be found at
www.stihl.com/safety-data-sheets.
16 Storing
16.1
Storing the Brushcutter
FSA 90
► Switch off the brushcutter, push the retaining
latch to position
and remove the battery.
► If a metal cutting attachment is mounted: Fit
the appropriate transport guard.
2
1
► Loosen the wing screw (1) and unscrew it until
the handlebar (2) can be rotated.
► Turn the handlebar (2) clockwise through 90°
and fold it down.
► Tighten down the wing screw (1) firmly.
► Ensure that the following conditions are met
when storing the brushcutter:
– The brushcutter is out of the reach of chil‐
dren.
– The brushcutter is clean and dry.
0458-709-9921-C
90
► If you store the brushcutter for more than 30
days: Remove the cutting attachment.
FSA 90 R
► Switch off the brushcutter, push the retaining
latch to position
and remove the battery.
► If a metal cutting attachment is mounted: Fit
the appropriate transport guard.
► Ensure that the following conditions are met
when storing the brushcutter:
– The brushcutter is out of the reach of chil‐
dren.
– The brushcutter is clean and dry.
► If you store the brushcutter for more than 30
days: Remove the cutting attachment.
16.2

Storing the Battery

STIHL recommends keeping the battery in a
charging state between 40% and 60 % (2 green
LEDs lit).
► The battery should be stored in such a way
that the following conditions are fulfilled:
– The battery is out of the reach of children.
– The battery is clean and dry.
– The battery is in an enclosed space.
– The battery is separated from the brushcut‐
ter.
– If the battery is stored in the charger, dis‐
connect the mains plug and store the
rechargeable battery at a battery charge
status between 40 % and 60 % (2 lit green
LEDs).
– The battery is in a temperature range
between - 10 °C and + 50 °C.
NOTICE
■ If the battery is not stored as described in this
user manual, the battery may become deeply
discharged and irreparably damaged.
► Charge a discharged battery before storing
it. STIHL recommends keeping the battery
in a charging state between 40% and 60%
(2 lit green LEDs).
► Store the battery separately from the brush‐
cutter.

17 Cleaning

17.1
Cleaning the Brushcutter
► Switch off the brushcutter, push the retaining
latch to position
and remove the battery.
► Clean the brushcutter with a damp cloth.
► Clean vents with a paintbrush.
English
43

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Fsa 90 r

Inhaltsverzeichnis