Preparing Trimmer For Operation; Charging The Battery, Leds - Stihl FSA 90 Gebrauchsanleitung

5 Preparing Trimmer for Operation

deflector, cutting attachment and battery. If the
brushcutter, deflector, cutting attachment or
battery are not cleaned correctly, components
may no longer function properly or safety devi‐
ces may be rendered inoperative. They may
cause serious injury to persons.
► Clean the brushcutter, deflector, cutting
attachment and battery as described in this
User Manual.
■ If the brushcutter, deflector, cutting attachment
or battery are not serviced or repaired cor‐
rectly, components may no longer function
properly or safety devices may be rendered
inoperative. This may result in serous or fatal
injury to people.
► Do not attempt to service or repair the trim‐
mer, deflector, cutting attachment or bat‐
tery.
► If the trimmer, deflector, cutting attachment
or battery require servicing or repairs: Con‐
tact your STIHL servicing dealer for assis‐
tance.
► Maintain the cutting attachment as descri‐
bed in the User Manual supplied with the
cutting attachment being used or on the
cutting attachment's packaging.
5 Preparing Trimmer for
Operation
5.1 Preparing the Brushcutter for
Operation
The following steps must be performed before
commencing work:
► Ensure that the following components are in a
safe condition:
– Brushcutter, 4.6.1.
– Deflector, 4.6.2.
– Mowing head or metal cutting attachment,
4.6.3 or 4.6.4.
– Battery, 4.6.5.
► Check the battery,
► Fully charge battery as described in the User
Manual for the STIHL AL 101, 300, 301-4, 500
chargers.
► Clean the brushcutter,
► Mount the handle,
► Select combination of cutting attachment,
deflector and carrying system,
► Mount the deflector,
► If a metal cutting attachment is used on a
loop-handled trimmer: Mount the barrier bar,
8.2.
0458-709-9921-C
12.2.
17.1.
8.1.
22.
8.3.1.
► Mount mowing head or metal cutting attach‐
ment, 8.4.1 or
► Fit and adjust the carrying system,
► Balance the brushcutter,
► Adjust the handle,
► Check the controls,
► If you cannot carry out this work: Do not use
your brushcutter and contact your STIHL
dealer for assistance.
5.2 Connecting the Battery with the
STIHL App by means of a
Bluetooth
► Activate the Bluetooth
mobile device.
► Activating the Bluetooth
the battery, 7.1.
► Download STIHL App from the app store of
your mobile device and create an account.
► Open and sign in on the STIHL App.
► Add the battery in the STIHL App and follow
the instructions on the screen.
For contacts and other information, please visit
https://support.stihl.com or the app.
The STIHL connected feature is available in the
STIHL App in certain markets.
6

Charging the Battery, LEDs

6.1 Charging the Battery
The charging time depends on various factors,
e.g. the battery temperature or the ambient tem‐
perature. The actual charging time may vary
from the charging time indicated. The charging
time is indicated at www.stihl.com/charging-
times.
► Recharge the battery as described in the User
Manual for the STIHL AL 101, 300, 301-4, 500
chargers.
6.2 Displaying the charge level
1
► Press the button (1).
The LEDs light up green for about 5 seconds
and indicate the state of charge.
English
8.5.1.
9.
9.3.
9.2.
12.1.
Radio Interface
®
®
radio interface on the
®
radio interface on
80-100%
60-80%
40-60%
0-20%
20-40%
35