RUSTA ADVANCED Gebrauchsanweisung Seite 60

A. Connect Corner Frame-Left (# 5) and Corner Frame-Right (# 6) to Short Frame with Leg Socket (# 4) using
Arc Washer (# G), Spring Lock Washer (# E), Screw (# F) and Allen Wrench (# I) as shown in FIGURE 5.
Please make sure all holes for springs are facing upward. Repeat in the same manner for the other set.
Step 4 – Side Frame Assembly
A. Connect Corner Frame-Left (# 5) and Corner Frame-Right (# 6) to Short Frame with Leg Socket (# 4) using
Arc Washer (# G), Spring Lock Washer (# E), Screw (# F) and Allen Wrench (# I) as shown in FIGURE 5.
ENG
SE NO
Please make sure all holes for springs are facing upward. Repeat in the same manner for the other set.
4A
# 5
B. Attach the assembled Side Frames on both sides to form the trampoline frame as shown in FIGURE 6.
4B
B. Attach the assembled Side Frames on both sides to form the trampoline frame as shown in FIGURE 6.
# 6
Step 5 –Side Leg Support Assembly
A. Lay out all parts shown below in FIGURE 7.
5A
# 13
# 14
60
B. Connect Left L-Shape Base (# 10) and Right L-Shape Base (# 11) to the two ends of T-Shape Base (# 12)
IM_759013120301_Trampoline_Advanced_550x400cm_v3.indd 60
# G
# E
# F
DE FI
# I
# G
# E
# F
# I
# 5
# 4
# 6
# 4
x2
# 10
TRAMPOLINE FRAME ASSEMBLY
# 4
# 4
# 5
# 5
# 5
# 5
17
# 15
17
# 16
# 12
#6
#6
FIGURE 5
FIGURE 5
#6
#6
#4
TRAMPOLINE FRAME ASSEMBLY
FIGURE 6
#4
FIGURE 6
# 13
# 14
# 11
FIGURE 7
2021-01-27 17:49