Disposal; Warranty; Eu Declaration Of Conformity - Protool IWC 18-2 TEC Originalbetriebsanleitung

12 Disposal

Return used or faulty battery packs to your local
specialist retailer, PROTOOL after-sales service or a
designated public waste management facility. The
battery packs will then be recycled.
EU only: European Directive 2006/66/EC stipulates
that faulty or used battery packs/batteries must be
recycled.
Do not throw the power tool in your household
waste! Dispose of machines, accessories and pack-
aging at an environmentally responsible recycling
centre. Observe the valid national regulations.
EU only: European Directive 2002/96/EC stipulates
that used electric power tools must be collected
separately and disposed of at an environmentally
responsible recycling centre.
REACh
REACh is a European Chemical Directive that
came into effect in 2007. As "downstream users"
and product manufacturers, we are aware of our
duty to provide our customers with information.
We have set up the following website to keep you
updated with all the latest news and provide you
with information on all the materials used in our
existing products:
http://www.tts-protool.com/reach

13 Warranty

For our tools, we give warranty for material and
production defects in accordance with the locally
applicable legal provisions, but in any case for at
least 12 months. Within the EU member states, the
warranty period is 24 months (verifi cation through
invoice or delivery note).
Damage caused by, in particular, natural wear,
overloading, incorrect handling, or damage caused
by the operator, or damage caused through use of
the equipment contrary that specifi ed in the Oper-
ating Instructions, or damage which was known at
the time of purchase, is not covered by the war-
ranty. Furthermore, damage caused by the use of
non-original PROTOOL accessories and consumable
material (e.g. sanding pads) is also excluded.
Complaints can only be recognised if the tool is
returned while still assembled to the supplier or an
authorised PROTOOL Customer Service workshop.
Keep the Operating Instructions, Safety Instruc-
tions, Spare Parts List and purchase receipt in a
safe place. Otherwise the respective, current war-
ranty conditions of the manufacturer shall apply.
Note
Due to continuous research and development work,
we reserve the right to make changes to the tech-
nical content of this documentation.
14 EU Declaration of
Conformity
Battery-powered
hammer screwdriver
IWC 18-2 TEC
We declare under our sole responsibility that this
product is in conformity with the following stand-
ards or standardization documents:
EN 55 014-1, EN 55 014-2, EN 60 745-1, EN 60 745-2,
EN 61 000-3-2, EN 61 000-3-3, EN 50 366 accord-
ing to the provision of the regulations stipulated in
Directive 2006/42/EC, 2004/108/EC.
Charger
BC 3
We declare under our sole responsibility that this
product is in conformity with the following stand-
ards or standardization documents:
EN 60 335-1, EN 60 335-2-29, EN 61 000-3-2,
EN 61 000-3-3, EN 61 204-3 according to the
provision of the regulations stipulated in Directive
2006/95/EC, 2004/108/EC.
All the procedures were applied as validly amended
at the time of the issue of this declaration, without
quoting these.
Technical documentation is kept at the manufac-
turer.
11
Stanislav Jakeš
Research and development
Protool GmbH
Wertstr. 20
D-73240 Wendlingen
3. 1. 2011
Serial no.
498075
Serial no.
494945
15