Mounting The Motor Plug On The Opposite Side - SCHUNK LDH Serie Montage- Und Betriebsanleitung

Maintenance and repair work

7.4 Mounting the motor plug on the opposite side

Removing the motor
plug
124 07.00 | LDH and LDK | Assembly and Operating Manual | en | GAS360923
Modifying the motor plug from side 1 to side 2
WARNING
For reasons of electrical safety, the motor plug may only be
replaced by a trained electrician.
Modifying the motor plug
1. Remove the motor housing
Uninstalling the motor housing
2. Unscrew the 2 screws (1).
3. Remove the cable cover (2).
4. Unscrew the 4 screws (3).
5. Remove the cover (4).
6. Unscrew the 4 screws (5).
7. Carefully pull out the motor plug (6) by about 2 mm.
[ 122].
}