SCHUNK LDH Serie Montage- Und Betriebsanleitung Seite 105

Evenness of the
mounting surface
Assembly
The values apply to the whole mounting surface to which the
product is mounted.
Requirements for evenness of the mounting surface (Dimensions in mm)
Edge length
< 100
> 100
The unit can be screwed both to the end plates and/or to the slide
and fixed with a centering sleeve.
Mechanical connection of the base plate
1 Adapter plates
2 Centering sleeves
3 M6 ISO 4762 mounting screws (tightening torque: 10 Nm)
M5 ISO 4762 mounting screws (tightening torque: 5.9
Nm)
07.00 | LDH and LDK | Assembly and Operating Manual | en | GAS360923
Permissible unevenness
< 0.02
< 0.05
Assembly
105