Operation - Cameo OPUS SP5 FC Bedienungsanleitung

12

OPERATION

:
NOTE
As soon as the spotlight is connected correctly to the power, "Software Update Please Wait..." and the Cameo logo with information on the
device model will display while the device starts up and the motor resets. The spotlight is ready after this process, and the operating mode
that was previously selected will activate.
The spotlight can be operated using the touch-sensitive
control fields next to the display, or the pressure-sensitive
display (can be used with gloves) itself can be used to
access all menu options and intuitively modify settings
as desired. Information on which control element on the
display and which control field next to the display have the
same functionality can be found in the adjacent table.
The following describes how to operate the device using
the control fields next to the display.
12 PAN LOCK
Mechanical locking mechanism to prevent the head from turning in a
horizontal direction during transport. Disconnect the device from the power,
position the head parallel to the base (4 positions), and disengage the
locking lever to unlock in the direction of the panning rotation axis. Unlatch
the mechanism before starting up the device.
13
TILT LOCK
13
Mechanical locking mechanism to prevent the head from turning in a
vertical direction during transport (7 positions). Disconnect the device from
the power and push the locking lever to unlock in the direction of the tilting
rotation axis, move the device head vertically until one of the 7 stopping
points is reached and the locking lever engages. Unlatch the mechanism
before starting up the device.
Display Control panel
7