Cut-Off Wheels - struers Unitom-50 Benutzerhandbuch

time test. The rotating parts of
the machine have been dy nam i-
cal ly balanced to ensure sta bil i ty
and to maximize the working life
of your Unitom.
Accessories
The Unitom family comes with
an extensive range of acces-
sories. A combined table and
cabinet is available for bringing
the cut-off machine into an ide al
working height. Quick-clamp ing
devices and vertical clamping
devices ensure full fl ex i bil i ty in
mounting.
Please refer to complete list in
this brochure.

Cut-off Wheels

Unitom is designed for cut-off
wheels of 300 and 350 mm di-
am e ter. For normal use, the 300
mm wheels (with a thick ness of
2 mm) are rec om mend ed. For
large workpieces, the 350 mm
wheels (with a thick ness of 2.5
mm) are used, allowing Unitom
to cut samples up to 120 mm
diameter.
Unitom-50 with its unique Exci-
Cut, will cut through even large
workpieces with 350 mm cut-off
wheels.
A range of Struers cut-off
wheels is available for cutting
any material.
Please refer to table (right).
Cut-off wheels
A range of cut-off wheels for all ferrous and non-ferrous metals has
been specially developed for Struers cut-off machines. Dia mond
cut-off wheels are available for cutting of ceramic and min er a log i cal
materials and sintered carbides.
Application
For ExciCut and direct cutting of
extremely hard steels (HV 350-800)
For ExciCut and direct cutting of
steels (< 500 HV). Extremely hard
(white cast iron) or ductile
(18/8 or St60) steel types are cut
with ExciCut.
Ensures good wheel economy
Universal cut off-wheel for steel-
alloys (< 700 HV). For ExciCut only
For ExciCut and direct cutting
of steels (< 500 HV).
Ensures very good wheel economy
For ExciCut and direct cutting of
non-ferrous metals (< 300 HV).
Primarily for ExciCut
For direct cutting of titanium and
its alloys, as well as other non-
ferrous metals (< 400 HV)
For direct cutting of sintered
carbides and ceramics
Ceramics and minerals
Plastics and resins, mounted materials
Extremely hard ferrous metals
Dimensions Grinding agent
300 x 2 x 32 mm Al O
2 3
350 x 2.5 x 32 mm Al O
2 3
300 x 2 x 32 mm Al O
2 3
350 x 2.5 x 32 mm Al O
2 3
350 x 2.5 x 32 mm Al O
2 3
300 x 2 x 32 mm Al O
2 3
350 x 2.5 x 32 mm Al O
2 3
300 x 2 x 32 mm SiC
350 x 2.5 x 32 mm SiC
300 x 2 x 32 mm SiC
350 x 2.5 x 32 mm SiC
305 x 1.8 x 32 mm Diamond
350 x 1.8 x 32 mm Diamond
305 x 1.5 x 32 mm Diamond
356 x 1.5 x 32 mm Diamond
300 x 1.5 x 32 mm Diamond
356 x 1.5 x 32 mm Diamond
305 x 1.8 x 32 mm CBN
356 x 1.8 x 32 mm CBN
Cutting of very
long, protruding
workpieces using
optional rubber
curtains
Even very bulky
workpieces can be
cut - here using
quick-clamping
devices (optional)
Code
51UNI
81EXO
53UNI
83EXO
8UEXO
54UNI
84EXO
56UNI
86EXO
56UNI
90EXO
25EXO
26EXO
55UNI
85EXO
59UNI
89UNI
58UNI
88EXO