Front Panel Controls - struers Unitom-50 Benutzerhandbuch

Front Panel Controls

Name Key
MAIN
SWITCH
Power
POWER
s
START
o
STOP
v V
/
POSITION
mO
MENU UP
mN
MENU
DOWN
Unitom-50
Instruction Manual
Function
The main switch is located to the
right hand side of Unitom-50.
Turn clockwise to switch on the
power.
Lights when main power is
switched on.
Starts the cutting process.
Stops the cutting process.
Moves the cut-off wheel up or
down.
Keep the key pressed to move
the cut-off wheel.
Moves the cursor up or
increases the parameter value.
Moves the cursor down or
decreases the parameter value.
1
COOLING VALVE: See next page!
Name Key
Esc
ESC
e
ENTER
F1
FUNCTION
KEY
F2
FUNCTION
KEY
F3
FUNCTION
KEY
F4
FUNCTION
KEY
2
EMERGENCY
STOP
Function
Leaves the present menu or
aborts functions/changes.
Accepts a marked parameter
value or chooses a menu.
Controls for various purposes.
See the bottom of the individual
screens.
Controls for various purposes.
See the bottom of the individual
screens.
Controls for various purposes.
See the bottom of the individual
screens.
Controls for various purposes.
See the bottom of the individual
screens.
- Push the red button to stop.
- Pull the red button to release.
9