Balluff BOS R254K-UUI-RS10-S4 Bedienungsanleitung Seite 120

BOS R254K-UUI-RS10-S4
Photoelectric Sensors
5
Secondary Device Functions (continued)
Speed Monitoring State
With Speed Monitoring State, the current status can be
read.
Value Meaning
0x00 (0) Idle
0x01 (1) Too low
0x02 (2) Ok
0x04 (4) Too high
0x08 (8) Startup
Delay
0xFF (255) Deactivated
Tab. 5-11: Signal Speed Monitoring – Speed Monitoring State
Speed Monitoring Value
With Speed Monitoring Value, the current speed value can
be read.
5.2.5 System Commands
Command Device Action
Value
0x81 (129) Application Reset – Resets writable
parameters to the default value.
0x82 (130) Reset Factory Settings – Resets writable
parameters to the default value.
0xAA (170) Signal Speed Monitoring Reset – Resets
the speed value and flags.
Tab. 5-12: Signal Speed Monitoring – System Commands
For an overview of all System Commands, see section 3.5
on page 21.
5.2.6 Events
Event Code Event Type
0x8D08 (36104) Warning
0x8D09 (36105) Warning
Tab. 5-13: Signal Speed Monitoring –Events
5.2.7 Variant Dependence
The functionality is available in all variants.
34 english
Description
No speed value yet available
Speed value is less than the
lower threshold
Speed value is in the suitable
range
Speed value is greater than
the upper threshold
Startup delay currently
running
Feature is deactivated
Description
Speed value is below the limit.
Speed value is above the limit.
Device Status
0 – Device is operating properly.
0 – Device is operating properly.