System Commands - Balluff BOS R254K-UUI-RS10-S4 Bedienungsanleitung

BOS R254K-UUI-RS10-S4
Photoelectric Sensors
3
Overview of IO-Link Data and Functions (continued)
Name Index
Device Access Locks 0x000C
Tab. 3-2: ISDU – Identification Data
3.5

System Commands

Command Value Device Action
0x80 (128) Device Reset – Device Reset means a warm start of the device. During this process, the
microcontrollers are restarted and all initializations performed again without any change made to
the parameter values (see chapter 6.3 on page 70).
0x81 (129) Application Reset (see chapter 6.3 on page 70)
0x82 (130) Reset Factory Settings (see chapter 6.3 on page 70)
0xA5 (165) Maintenance Reset (see chapter 6.3 on page 70)
0xA6 (166) Switching Counter Reset – Resets counter value and flags.
0xA7 (167) Statistics Reset – Resets all output parameters to 0 and all user settings to the default values.
0xA8 (168) Statistics Start Min/Max/Avg – Starts the statistics of the minimum value/maximum value/average
calculation.
0xA9 (169) Statistics Stop – Stops statistics operation completely.
0xAA (170) Signal Speed Monitoring Reset – Resets the speed value and flags.
0xAC (172) Statistics Start Moving Average – Starts the statistics of the moving average calculation.
0xAF (175) Start Device Discovery
0xC0 (192) Set Reference Orientation – Sets the reference orientation of the actual position of the device.
Responses: ACK: command successful, reference stored.
0xE0 (224) Teach Preset – Sets the current measurement value to the value of Measurement Preset.
Tab. 3-3: System Commands – Overview
www.balluff.com
Sub- Access
index
Device Access Locks
0 R/W
(12)
Length Data Type
2 bytes UINT16
Data Default
Storage
Yes 0
english 21