Pin Assignment - Balluff BOS R254K-UUI-RS10-S4 Bedienungsanleitung

BOS R254K-UUI-RS10-S4
Photoelectric Sensors
6
System Functions (continued)
6.5

Pin Assignment

6.5.1 Description
Several internal digital and analog signals are available that
can be output or read in at the pins of the device.
Pin 4 and pin 2 can be configured with the following
functions:
Pin 4:
Digital Output
Pin 2:
– Digital Output
– Digital Input
– Analog Output
6.5.2 ISDU
Name Index
Pin 4 Function 0x0090
(144)
Behavior IO-Link
Mode
Pin 4 Digital 0x0091
Configuration1) (145)
Signal Source
Logic
Type
Pin 2 Function 0x0093
(147)
Behavior IO-Link
Mode
Pin 2 Digital 0x0094
Configuration1) (148)
Signal Source
Logic
Type
Pin 2 Analog 0x0095
Configuration (149)
2)
Signal Source
Characteristic
Type
The settings in the digital configuration are only used if the pin was configured as a digital output or digital input.
1)
The settings in the analog configuration are only used if the pin was configured as an analog output.
2)
Tab. 6-11: Pin assignment – ISDU
72 english
Subindex Access Length
0 R/W 2 bytes
1 R/W 1 byte
2 R/W 1 byte
0 R/W 4 bytes
1 R/W 2 bytes
2 R/W 1 byte
3 R/W 1 byte
0 R/W 2 bytes
1 R/W 1 byte
2 R/W 1 byte
0 R/W 4 bytes
1 R/W 2 bytes
2 R/W 1 byte
3 R/W 1 byte
0 R/W 4 bytes
1 R/W 2 bytes
2 R/W 1 byte
3 R/W 1 byte
Data Type Data
Storage
Yes
UINT8(ENUM) No
UINT8(ENUM) No
Yes
UINT16(ENUM) No
UINT8(ENUM) No
UINT8(ENUM) No
Yes
UINT8(ENUM) No
UINT8(ENUM) No
Yes
UINT16(ENUM) No
UINT8(ENUM) No
UINT8(ENUM) No
Yes
UINT16(ENUM) No
UINT8(ENUM) No
UINT8(ENUM) No
Default
0x00 (0) IO-Link
0x01 (1) = Digital Output
0x002D (45) = Optical
Transmitter Error
0x00 (0) = Normal
0x02 (2) = Push-Pull
0x01 (1) = Normal
Operation
0x0000 (0) = Disabled
0x002D (45) = Optical
Transmitter Error
0x00 (0) = Normal
0x02 (2) = Push-Pull
0x0022 (34) = Optical
Transmitter Power
0x00 (0) = Rising
0x00 (0) = 4...20mA