Making A Bag Using The Bag Roll; Preserve Food With Vacuum - CASO DESIGN VC11 Original Bedienungsanleitung

16.3

Making a bag using the bag roll

Place the unit on a dry place. Make sure the working area in front of the unit is free of
3. Press the cover down heavily on both sides by the
areas (D) using two hands until two click sounds
heard (see Step 2).
4. Press the "Schweißen"-Button and the red LED
control light starts flashing.
5. When the LED light turns off, the bag is sealed.
6. Now you have a custom-sized bag.
► Make sure that the bag you want to use is at least
8cm/3.1in. longer than the food. Add another 2 cm/0.8in. each time the bag is re-
used.
16.4

Preserve food with vacuum:

obstacles and wide enough to accommodate the food bags.
1. Unroll the bag to the desired length and cut the
2. Open the lid and put one end of the bag on top of
Please note
1. Put the food that you want to preserve inside the bag.
2. Clean and straighten the open end of the bag, make sure
that there are no wrinkles or ripples on the panels of the open
ends.
3. Place the bag as shown on the picture in the device. Do
not place the bag over the intake (L), otherwise the vacuum ca
not be generated correctly.
4. Close the cover and then
press heavily on both sides (D)
of the cover until two click
sounds heard.
5. Choose desired sealing time.
6. Press the "Vakuum &
Schweißen"-button then the bag
will be automatically vacuumed
and sealed.
bag to the appropriate length with precise and
clear cut.
the black rubber
strip, then close
the cover (see
Step 1).
39