Stand-Alone Mode; Setting Solid Colors; Internal Programs; Sound Control / Sensitivity - EuroLite LED KLS-1001 Bedienungsanleitung

STAND-ALONE MODE

In Stand-Alone Mode, the LED BAR-12 RGB 12x1W can be used without a controller. Disconnect the LED
BAR-12 RGB 12x1W from the controller.
LED Screen
The LED screen offers several features: you can run the internal programs or set the starting address.
Browse through the main menu by pressing the MODE button.
You can change the selection by pressing UP or DOWN.
The functions provided are described in the following sections.
The display shuts off after 30 seconds of inactivity. With the touch of a button it lights up again.

Setting Solid Colors

Press the MODE button to select the solid color mode. When the LED screen shows C, you can select the
desired solid color via the UP or DOWN buttons (see following graphic).
Mode:
C

Internal Programs

Press the MODE button to select the internal program mode. When the LED screen shows P, you can select
the desired internal program, with or without sound control, via the UP or DOWN buttons (see following
graphic).
Mode:
P

Sound Control / Sensitivity

Press the MODE button until the LED screen shows S. You can select the desired sensitivity via the UP or
DOWN buttons.
Mode:
S S00 - S99 (S50 default)

DMX MODE

The LED screen allows you to assign the DMX fixture address, which is defined as the first channel from
which the LED BAR-12 RGB 12x1W will respond to the controller.
Value:
C01
C02
C03
C04
C05
C06
C07
Value:
P1
P2
P3
P4
P5
P6
Value
Function:
Red
Green
Blue
Cyan
Magenta
Yellow
White
Function:
Endless loop in 7 colors,
change every 3 seconds
Endless loop in 7 colors,
fade every 3 seconds
Endless loop in 3 colors,
change every 3 seconds
Endless loop in 3 colors,
fade every 3 seconds
Endless loop in 7 colors,
via sound control
Endless loop in 3 colors,
via sound control
21/23
00058443.DOC, Version 1.1