Operating Determinations - EuroLite LED KLS-1001 Bedienungsanleitung

If inclined tension cables or prolonged outriggers are used, the area of danger has to be marked or even be
blocked.
Before lifting or lowering the telescopic tubes, you must always block a safety area around the stand. This
safety area must have a diameter of 1.5 times the maximum height.
Lifted telescopic tubes always have to be secured with a secondary securing!
Before taking into operation, every stand has to be checked upon possible damages.
If one part of a stand is defective, the stand must not be taken into operation.
Keep away children and amateurs!

OPERATING DETERMINATIONS

This product is a speaker-system stand for installing speaker-systems with a suitable flange. The given
carrying capacity of the stand must not be exceeded.
This product is designed for professional use, e.g. on stages, in discotheques, theatres etc.
Stands with their loads have to be secured against unintended movements.
When choosing the installation-spot, please make sure that the stand has to be installed in a way that no
person can enter the area below the stand or its load! Make sure that the respective area is blocked.
An unintended movement of the load has to be avoided.
Stands have to be operated by instructed persons. The different local conditions have to be considered in
terms of safety rules.
The installer is responsible for adhering to the carrying capacity given by the manufacturer, the safety
requirements and the qualification of possible co-workers.
When people are located below the load, all necessary safety measures have to be taken in order to avoid
injury.
The personnel has to be instructed on the content of the user manual and on the dangers related with
operating stands.
Depending upon the individual installation spot, all necessary measures against movement and for securing
the standing safety have to be created.
The installation is only allowed on carrying areas. In some cases, an appropriate substructure, e.g. via an
balancing foot, has to be created.
When choosing the installation material, optimum dimensions have to be chosen in order to secure
maximum safety.
Never install any objects offering a large surface for winds (e.g. banners, signs, etc.).
The loads have to be installed in a balanced way.
Operate the product only after having become familiar with its functions. Do not permit operation by persons
not qualified for operating the product. Most damages are the result of unprofessional operation!
The stand must never be moved before having lowered all telescopic tubes!
Please use the original packaging if the product is to be transported.
Please consider that unauthorized modifications on the product are forbidden due to safety reasons!
9/12 00032837, Version 3.5