Cleaning And Maintenance - EuroLite LED KLS-1001 Bedienungsanleitung

Channel 7 - Chaser 2
Value:
001 - 255
Channel 8 – Internal Programs, Sound Control
Value:
000 – 005
006 – 039
040 – 069
070 – 099
100 – 129
130 – 159
160 – 189
190 – 219
220 – 249
250 – 255
Channel 9 - Speed
Value:
000 - 255
Channel 10 – Strobe
Value:
000 – 010
011 - 128
129 - 255

CLEANING AND MAINTENANCE

The operator has to make sure that safety-relating and machine-technical installations are inspected by an
expert after every four years in the course of an acceptance test.
The operator has to make sure that safety-relating and machine-technical installations are inspected by a
skilled person once a year.
The following points have to be considered during the inspection:
1) All screws used for installing the devices or parts of the device have to be tightly connected and must not
be corroded.
2) There must not be any deformations on housings, fixations and installation spots (ceiling, suspension,
trussing).
3) The electric power supply cables must not show any damages, material fatigue (e.g. porous cables) or
sediments. Further instructions depending on the installation spot and usage have to be adhered by a
skilled installer and any safety problems have to be removed.
We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no serviceable parts inside the device except for the fuse. Maintenance and service operations are
only to be carried out by authorized dealers.
Function:
LED Chaser from up to down
Function:
No function
Program 1
Program 2
Program 3
Program 4
Program 5
Program 6
Program 7
Program 8
Sound Control
Function:
Increasing speed of the program settings
under channel 8 (006 - 249)
Function:
No function
Master strobe, with increasing speed
Chasing strobe, with increasing speed
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
23/24
00066535.DOC, Version 1.0