Description Of The Device; Features; Overview; Installation - EuroLite LED KLS-1001 Bedienungsanleitung

DESCRIPTION OF THE DEVICE

Features

Handy professional light bar with 12 x 1-W-LEDs
Operable in stand-alone mode or via DMX • DMX512 control possible via any commercial DMX controller
(occupies max. 5 channels) • 3 or 5 DMX channels selectable for numerous applications • Sound-control via
built-in microphone • Adjustable microphone sensitivity via control panel • Comfortable addressing and
setting via control panel with LED screen and three operating buttons • Functions: Static colors, RGB color
blend, 6 internal programs, dimmer and strobe settings via DMX, Master/Slave • Equipped with 12 x 1 W
LEDs • Beam angle approximately 16° • Floor, ceiling or trussing installation possible • Locking possibility at
the mounting bracket

Overview

(1) LED groups
(2) Floor-stand/ mounting bracket
(3) Fuseholder
(4) Power supply
(5) Fixation screw
(6) Housing
(7) DMX-In
(8) DMX-Out
(9) LED screen
(10) Operating buttons(Mode, Up,
Down)

INSTALLATION

The LED BAR-12 can be installed on the ground or on the wall or ceiling.

Attachment

Before attaching the device, make sure that the installation area can hold a minimum point load of 10 times
the device's weight.
The device must only be installed absolutely planar at a vibration-free, oscillation-free and fire-resistant
location. Make sure that the device is installed absolutely planar by using a water-level.
The device must be installed out of the reach of people.
The device must always be installed via all fixation holes. Do only use appropriate screws and make sure
that the screws are properly connected with the ground.
The durability of the installation depends very much on the material used at the installation area (building
material) such as wood, concrete, gas concrete, brick etc. This is why the fixing material must be chosen to
suit the wall material. Always ask a specialist for the correct plug/screw combination indicating the maximum
load and the building material.
1
2
7 8
Type: LED BAR-12 RGB 12x1W
Power supply: 230 V AC, 50 Hz ~
Power consumption: 36 W
Fuse: F 1 A, 250 V
LEDs: 12 x 1 W
T =45° C
a
17/23
5
3
4
9 10
F
www.eurolite.de
00058443.DOC, Version 1.1