8.6.1
Decommissioning
CAUTION!
Used machines need to be decommissioned in a professional manner in order to avoid
later misuse and endangerment of the environment or persons.
Disassemble the machine if required into easy-to-handle and reusable assemblies
and component parts.
Dispose of machine components and operating fluids using the intended disposal
methods.
8.6.2
Dismantling
Pull the power cord or disassemble the connection cable and disconnect the connection
cable.
8.6.3
Disassembly
Drain the oil
from the headstock, drain hole
from the feed gear, drain hole
from the apron, drain hole
Disassemble the drive motor
8.6.4
Packing and loading
Place the machine on 2 palettes to allow for removal transport
Transport on page 100
Bolt the machine to the through holes of the machine base with the pallets.
Dismantle the splash guard.
Tense up the machine with tensioning belts on the machine bed.
8.7
Disposal of new device packaging
All used packaging materials and packaging aids from the machine are recyclable and gener-
ally need to be supplied to the material reuse.
The packaging wood can be supplied to the disposal or the reuse.
Any packaging components made of cardboard box can be chopped up and supplied to the
waste paper collection.
The films are made of polyethylene (PE) and the cushion parts are made of polystyrene (PS).
These materials can be reused after reconditioning if they are passed to a collection station or
to the appropriate waste management enterprise.
Only forward the packaging materials correctly sorted to allow direct reuse.
8.8
Disposal of lubricants and cooling lubricants
ATTENTION!
Please imperatively make sure to dispose of the used coolant and lubricants in an
environmentally compatible manner. Observe the disposal instructions of your municipal
waste management companies.
INFORMATION
Used coolant emulsions and oils should not be mixed since it is only possible to reuse oils with-
out pre-treatment when they have not been mixed.
The disposal instructions for used lubricants are made available by the manufacturer of the
lubricants. If necessary, request the product-specific data sheets.
Version 1.0.5 - 2021-03-23
„ Headstock" on page 139
„ Feed gear" on page 138
„ Apron" on page 138
Translation of original instruction
TH3610 | TH3610D
EN
147