SolarV EPEVER UPower-Hi Serie Betriebsanleitung Seite 84

 When the battery voltage reaches the low voltage disconnect voltage or reaches the float
charging voltage, the inverter/charger calibrates the battery capacity for the first time.
 When the battery goes from the over-discharged state to the fully-charged state, the
inverter/charger calibrates the battery capacity again.
When the connected lithium battery (with BMS) is equipped with a battery capacity
display, the lithium battery capacity will be displayed as per the BMS.
CAUTION

Interface Definition
Item
www.solarv.de
Settings
INPUT
OUTPUT
Load
Battery
PV
Utility
Battery Type
25
Content
Solar priority
Utility & solar
Solar
Utility priority
Inverter priority
AC output voltage
AC output current
AC output power
AC output frequency
Battery voltage
Max. charging current(PV charging
current+ utility charging current)
Battery temperature
Battery SOC
PV input voltage
PV input current
PV input power
PV input capacity
Utility input voltage
Utility charging input current
Utility charging input power
Utility input capacity
AGM
GEL
FLD
LFP8/LFP15/LFP16
LNCM7/LNCM14
AGM/GEL/FLD/LFP/LNCM+USER
Copyright © 2021 SolarV GmbH All rights reserved
EN