Herunterladen Inhalt Inhalt Diese Seite drucken

Installation Instructions; General Installation Notes - SolarV EPEVER UPower-Hi Serie Betriebsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Battery mode
Supported battery types:AGM、GEL、FLD、LFP8/LFP15/LFP16、LNCM7/LNCM14
AC loads shall be determined according to the output power of the inverter/charger.
The load exceeding the maximum output power may damage the inverter/charger.
WARNING
 For different battery types, confirm the relevant parameters before power on.
 No-battery mode and battery mode can set by setting item 0.
CAUTION

2 Installation Instructions

2.1 General installation notes

Read all the installation instructions carefully in the manual before installation.
Be very careful when installing the batteries. Please wear eye protection when installing the
open-type lead-acid battery, and rinse with clean water in time for battery acid contact.
Keep the battery away from any metal objects, which may cause a short circuit of the battery.
Acid gas may be generated when the battery is charged. Ensure that the surrounding environment is
well ventilated.
www.solarv.de
9
Copyright © 2021 SolarV GmbH All rights reserved
EN

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis