Operating Mode - SolarV EPEVER UPower-Hi Serie Betriebsanleitung

Max. PV open circuit
voltage
MPPT voltage range
Max. PV input power
(Note: For the curve of Max. PV input power Vs. PV open-circuit voltage, see chapter
Max. PV charging power
Max. PV charging
current
Equalize charging voltage
Boost charging voltage
Float charging voltage
Low voltage disconnect
voltage
Tracking efficiency
Temp. compensate
coefficient
General
Surge current
Zero load consumption
Standby current
Mechanical Parameters
Dimension(H x W x D)
Mounting size
Mounting hole size
Net Weight
 At minimum operating environment temperature
www.solarv.de
2000W
1725W
60A
29.2V(AGM default)
28.8V(AGM default)
27.6V(AGM default)
21.6V(AGM default)
50A
<1.6A
(without PV and utility connection, turn on the load output)
<1.2A
(without PV and utility connection, turn off the load output)
607.5x381.6x127mm 642.5x381.6x149mm
585*300mm
Φ10mm
15kg
 
250V , 220V
60~200V
3000W 3000W
2875W 2875W
100A
≥99.5%
-3mV/℃/2V(Default)
60A
<1.6A <1.2A
<1.0A <0.7A
642.5x381.6x149mm
620*300mm 620*300mm
Φ10mm Φ10mm
19kg
 At 25℃ environment temperature
54
4000W

3.4 Operating mode

for details.)
4000W
50A 80A
58.4V(AGM default)
57.6V(AGM default)
55.2V(AGM default)
43.2V(AGM default)
56A 95A
<0.8A
<0.6A
642.5x381.6x149mm
620*300mm
Φ10mm
19kg 19kg
Copyright © 2021 SolarV GmbH All rights reserved
EN