SolarV EPEVER UPower-Hi Serie Betriebsanleitung Seite 105

Utility over
voltage
37
disconnec
tion
voltage
Utility low
voltage
38
disconnec
tion
voltage
Battery
discharge
39 current
limit
Refer to
3.7 for
details.
lithium
40
battery
protocol
type
Software
41
version
3.6 Battery voltage customized logic.
For the above items7-16 and 33-36, please follow the below rules strictly.
1) In the 24V input voltage system, the following rules must be followed when modifying the
parameter values in the user battery type for a Lead-acid battery.
Over Voltage Disconnect Voltage ≥ Over Voltage Reconnect Voltage+0.5V
A.
Over Voltage Disconnect Voltage > Charging Limit Voltage ≥ Equalize Charging Voltage ≥ Boost
B.
Charging Voltage ≥ Float Charging Voltage > Boost Reconnect Charging Voltage
Low Voltage Reconnect Voltage ≥ Low Voltage Disconnect Voltage+0.5V
C.
www.solarv.de
LFP16: 51.4V
LCNM14: 52.4V
132.0V (Default for the 110V system ） User
define: 110VAC~140VAC
Step size: long press for 10V，short press for 1V
264.0V (Default for the 220V system ） User
define: 220VAC~290VAC
Step size: long press for 10V，short press for 1V
88.0V (Default for the 110V system ） User
define: 80VAC~110VAC
Step size: long press for 10V，short press for 1V
176.0V(Default for the 220V system ） User
define: 90VAC~190VAC
Step size: long press for 10V，short press for 1V
UP2000-HM6021/UP2000-HM6022:
200A(Default) User define: 10~200A
UP3000-HM5041/UP3000-HM5042/UP3000-HM
8041: 150A(Default) User define:10~150A
UP3000-HM10021/UP3000-HM10022:
300A(Default) User define: 10~300A
UP5000-HM8042:
define:10~250A
Step size: Long press for 10A，short press for 1A
1(Default)
User Define:1~10
NOTE: Refer to the (3) Lithium battery BMS Interface
of chap 1
U-1.0(Default)
It cannot be modified.
NOTE: Detail version refers to the actual display.
46
250A(Default)
Copyright © 2021 SolarV GmbH All rights reserved
EN
User