SolarV EPEVER UPower-Hi Serie Betriebsanleitung Seite 62

temperature would be very high. Please do not touch it.

When the inverter/charger is working, please do not open the inverter/charger cabinet to operate.

When eliminating the faults or disconnecting the DC input, turning off the inverter/charger's switch,
then carry out the operation after the LCD screen is completely OFF.
The dangerous operations which would cause electric arc, fire, or explosion:
8.

Touch the wire end that hasn't been insulation treated and maybe electriferous.

Touch the wiring copper row or internal devices that may be electriferous.

The power cable connection is loose.

Screw or other spare parts inadvertently falls into the inverter/charger.

Incorrect operations are carried by untrained non-professional, or technical personnel.
Once an accident occurs, it must be handled by professional and technical personnel.
Improper operations would cause more serious accidents.
WARNING
Safety cautions for stopping the inverter/charger
9.

Firstly turn off the breakers on the utility input side and AC output side, then turn off the DC switch;

After the inverter/charger stops for ten minutes, the internal conductive devices could be touched;

The inverter/charger can be restarted after removing the faults which may affect its safety
performance;

No maintenance parts in the inverter/charger. If any maintenance service is required, please contact
our after-sales service personnel.
Do NOT touch or open the shell after the inverter is powered off within ten minutes.
WARNING
Safety cautions for inverter/charger maintenance：
10.

Testing equipment is recommended to check the inverter/charger to make sure there is no voltage or
current;

When conducting electrical connection and maintenance work, must post temporary warning sign or
put up barriers to prevent unrelated personnel from entering the electrical connection or maintenance
area;

Improper maintenance operation to the inverter/charger may cause personal injury or equipment
damage;

Wear an antistatic wrist strap, or avoid unnecessary contact with the circuit board.
The safety mark, warning label, and nameplate on the inverter/charger should be
visible, not removed, or covered.
CAUTION
www.solarv.de
3
Copyright © 2021 SolarV GmbH All rights reserved
EN