SolarV EPEVER UPower-Hi Serie Betriebsanleitung Seite 80

 Function:
For base UPower-Hi products, its DB9 interface provides 0.2A/5V power supply and can
be connected to a WiFi module or PC.
For RTU-type UPower-Hi products, its DB9 interface provides 0.2A/12V power supply and
can be connected to RTU, WiFi module, or PC.
Install the cover and secure the screws.
8)
2.6 Operating the inverter/charger
1) Close the circuit breaker of the battery side.
2) Turn the rocker switch on the side of the inverter/charger to the ON state. The inverter/charger
www.solarv.de
21
Copyright © 2021 SolarV GmbH All rights reserved
EN