Safety Instructions - SolarV EPEVER UPower-Hi Serie Betriebsanleitung

Safety Instructions

Please reserve this manual for future review.
This manual contains all the instructions for safety, installation, and operation of the UPower-Hi
series inverter/charger (below referred to as the inverter/charger).
Explanation of symbols
1.
Please read related literature accompanying the following symbols to enable users to use the
product efficiently and ensure personal and property safety.
The entire system should be installed by professional and technical personnel.
Symbol Definition
TIP Indicates any practical advice for reference.
IMPORTANT: Indicates a critical tip during the operation, if ignored, may cause the
device to run in error.
CAUTION: Indicates potential hazards, if not avoided, may cause the device
damaged.
WARNING: Indicates the danger of electric shock, if not avoided, would cause
casualties.
WARNING HOT SURFACE: Indicates the risk of high temperature, if not avoided,
would cause scalds.
Read the user manual carefully before any operation.
Symbols of the inverter/charger
2. Requirements for professional and technical personnel

Professionally trained;

Familiar with related safety specification for the electrical system;

Read this manual carefully and master related safety cautions.
www.solarv.de
1
Copyright © 2021 SolarV GmbH All rights reserved
EN