Alarm Function; Set Alarm; Switching Off The Alarm; Sleep Timer - Renkforce 1918174 Bedienungsanleitung

g) Alarm function
Selecting alarm settings
• Press the MENU button (7) or button
buttons (16), select the menu point "" „ALARM" and confirm the selection.
The menu point „ALARM" can also be reached directly via button

Set alarm

The device offers two alarm times which you can set and use separately. The setting procedure for the two alarms
is the same.
• In the alarm menu, select the desired alarm and switch it on.
• Now set the alarm time, tone, days and volume.
To wake up to the internet radio you must choose a station from your favourites list.
• The alarm is now active and installed. You can exit the menu now.
• The display (4) shows a corresponding symbol when the alarm function is activated.

Switching off the alarm

• When the alarm starts you can switch it off by pressing the rotary dial (8)or the OK button (26).
• The alarm stays off until the next set alarm time.
• To completely deactivate the alarm, navigate through the alarm menu and switch the activated alarm off.
• The available settings for the alarm are preserved in spite of this.
h) Sleep timer
With this function, you can set the device to switch off after a certain time in order, for example, to listen to music as
you fall asleep.
• Press the MENU button (7) or button
buttons (16), select the menu point „SLEEP TIMER" and confirm the selection.
The menu point „SLEEP TIMER" can also be reached directly via button
• When you activate the Sleep timer (you must select a time) the radio switches off automatically at the selected time.
• You can choose from the following times: 15, 30, 45, 60, 90, 120, 150 or 180 minutes.
(20 on the remote control and using the rotary dial (8) or the arrow
(20 on the remote control and using the rotary dial (8) or the arrow
(17).
(18).
43