Media Center; E) Alarm - Renkforce IR1 Bedienungsanleitung

d) Media center
• The internet radio also supports DLNA. This means that you can play back music right on the internet
radio with a compatible device in the same network.
• This works, e.g., with Windows
tivated in your Windows
switch on this function. You may also need to release it in your firewall.
Start the playback by right-clicking the track in Media Player and selecting "Play To". The internet radio
has the DLNA name "Renkforce IR1". You then need to click it.
• Another option here is, e.g., playback from a Smartphone or tablet with Android or iOS. Here, you can
switch playback to the internet radio while a piece of music is played on the respective device. Observe
the respective operating instructions of the system used.
• You can change the device name in the item "DLNA Setup" in the menu "Configuration".

e) Alarm

Call alarm configuration:
• To switch to the menu where you can make the configurations for the alarm, it is easiest to push the
"Alarm" (C2) button on the remote control.
Alternatively, you can also find the configurations in the menu "Configuration" - "Alarm".
Set alarm:
The device offers two alarm times that you can set and use independently of each other. The configurations
are identical for both.
• Now either choose "Alarm 1 (Turn Off)" or "Alarm 2 (Turn Off)" in the alarm menu. For this, use the two
arrow buttons C9 and C10 of the dial A8 again. Push "Enter" (C13) or A8 for selection.
• Next, push the C9 button once or turn the A8 dial at the radio so that the white selection bar is set to "Turn
On". Confirm with C13 or A8.
• Push C13 or A8 again to select the menu "Repeat".
• Select how often and when the alarm is to be repeated.
• Now select whether the alarm is to take place "Everyday", "Once" or on one or several specific week
days. Make your selection in the menu using the arrow buttons C9 and C10 or the A8 wheel again. To
select the desired option, confirm with the C13 or A8 button. The internet radio will sound the alarm on
days applied with a check mark.
• Use the button C11/A7 to return to the previous menu and navigate to the item "Time: 00:00".
• Open the item and set the desired alarm time. For this, use the arrows (C9/C10) on the remote control or
the setting wheel (A8) at the device. Confirm the time with the C13 or A8 button.
50
Media Player. The prerequisite is, however, that Media Sharing is ac-
®
. At the first call, you will usually be asked automatically whether you want to
®