Sleep Timer; Alarm Function - Renkforce RF-DAB-BEDSIDE1 Bedienungsanleitung

e) Sleep Timer
This function switches off the device automatically after an adjustable time (e.g. to fall asleep
with music).
• Push the button SLEEP (3) and select the desired duration after which the device is to switch
off with the buttons PREV (7) and NEXT (11).
• Push the SCAN/ENTER button (9) to confirm the input.
• The device will switch off automatically after the end of the set time.
• If OFF was selected, the function is off and the device will work continually.
f) Alarm Function
Setting the alarm time
• Push the button ALARM (1).
• Select the desired alarm time ALARM 1 or 2 with the button PREV (7) or NEXT (11).
• Push the button SCAN/ENTER (9) and set the desired alarm time to ON with the buttons
PREV (7) and NEXT (11).
• Push the button SCAN/ENTER (9) and set the hours for the alarm time.
• Proceed as described above for the further settings and set the minutes, alarm volume, alarm
sound (buzzer, DAB-radio or FM radio).
• Push the SCAN/ENTER button (9) to confirm the inputs.
• If necessary, set the second alarm time as described above.
The display shows the corresponding bell icon in the upper left with the alarm function
activated.
Pushing the button MENU/INFO (4) during setting will take you one step back each.
Snooze function
• When the alarm sounds, you can also mute it for 9 minutes by pushing the button
SNOOZE/DIMMER (5).
• After the end of this set snooze time, the alarm signal will sound again.
33