Safety Information For Initial Start-Up - Webasto Next Bedienungs- Und Einbauanleitung

3 | Safety
l Make sure that the electrical connections are de-ener-
gised before connecting the charging station to the
EN
power supply.
l Make sure that the correct supply cable is used for the
power connection.
l Do not leave the charging station unattended with the
cover open.
l Change DIP-switch settings only with the power off.
l Register with the power supply company as required.
3.5 Safety information for initial start-
up
WARNING
l Initial start-up of the charging station must be carried
out only by an electrician.
l Prior to initial start-up, the electrician must check that
the charging station has been connected correctly.
l Do not connect a vehicle during initial start-up of the
charging station.
l Before starting-up the charging station, check the
charging cable, charging coupling and the charging
station for visible damage. The charging station must
not be started up if it is damaged or if the charging
cable/charging coupling is damaged.
28 / 45 5111232B OI-II Webasto Next DE-EN