Navkom Bioreader Bedienungsanleitung Seite 57

EN
DISCONNECTING THE READER (ANDROID)
CONNECTING TO THE READER (APPLE)
EVERY NEW READER NEEDS TO BE ADDED IN THE X-MANAGER APPLICATION, BEFORE IT CAN BE USED. IF
MORE THAN ONE READER IS CONNECTED TO A SINGLE X-MANAGER APPLICATION, IT IS IMPORTANT THAT THE
FIRST CONNECTION IS ESTABLISHED WITH ONE READER AT A TIME. THE REST OF THE READERS SHOULD NOT
BE CONNECTED TO A POWER SUPPLY AT THE TIME OF THE FIRST CONNECTION.
108
Press and hold the name
of the reader. When
prompted, confirm the
disconnection.
0 Firstly, press Add device,
followed by START.
0 To confirm the connection,
press Join.
0 After entering the name of
the reader, press Setup.
CONNECTION TO THE READER (APPLE) WITH AN ADDITIONAL DEVICE
A SINGLE READER CAN BE CONNECTED TO MORE THAN ONE DEVICE (X-MANAGER APP)
When adding a new device, it is necessary to turn off the Wi-Fi on devices that have already been
added, if they are nearby, otherwise they will try to connect and disable the addition of the new
device.
1
Press the i icon next to the name of the reader on the device with
established connection to the reader. After prompted, press Show
1
password.
The password will appear on the lower portion of the screen. Write it
down.
On the new device, press + and in the next step, chose the option
2
Manual Setup. When prompted, enter the name and the previously
retrieved password of the reader and press SETUP.
DISCONNECTING THE READER (APPLE)
EN
2
Press the i next to the name of
the reader and then confirm by
pressing DELETE.
109